Unique Power Solutions supplies generator AMF panels and supports AMF panel installation as part of generator control and turnkey power projects.
AMF stands for Automatic Mains Failure. An AMF control system monitors the mains supply, manages generator start and stop commands, and coordinates load transfer through suitable switching equipment.
For a new installation or an existing DG set, the proposed panel should match the generator controls, electrical rating and required operating sequence. Share your generator details and site requirements to request an AMF panel quotation.
How Does a Generator AMF Panel Work?
A generator AMF panel manages the backup-power sequence according to the selected controller and configured settings.
A typical sequence is:
- Monitor the mains supply against the configured limits.
- Send a generator start command after the mains-failure delay.
- Check that generator voltage and frequency meet the required conditions.
- Command the transfer equipment to connect the selected load to the generator.
- Transfer the load back after the restored mains supply meets the return conditions.
- Allow the configured generator cooldown before issuing the stop command.
The controller, transfer equipment and generator interface must work together. Start, transfer and return delays are selected for the generator and load requirements.
Generator AMF Panel Functions to Specify
Unique Power Solutions can evaluate the required control functions when preparing an AMF control panel proposal.
| Function | What to Specify |
|---|---|
| Mains Monitoring | Required voltage, frequency and phase-related checks |
| Generator Start and Stop | Compatible start interface and operating sequence |
| Load Transfer Control | Existing or proposed transfer equipment and position feedback |
| Operating Modes | Automatic, manual and test functions required |
| Status Indication | Mains availability, generator status, transfer position and alarms |
| Fault Handling | Required warnings, shutdown signals and protection coordination |
| Time Settings | Start, transfer, return-to-mains and cooldown requirements |
| Communications | Remote monitoring or system integration, where required |
Available functions depend on the selected controller, connected sensors and panel design. Request a feature list for the quoted equipment.
AMF Panel Installation Services
Unique Power Solutions supports AMF panel installation within an agreed generator project scope.
Installation planning considers the existing electrical system, generator location, cable routes and transfer arrangement. The proposal should identify panel supply, mechanical installation, electrical integration and commissioning responsibilities.
An installation scope can cover:
- Review of the generator controls and electrical drawings
- Selection of the controller and power-switching arrangement
- Panel positioning and mounting
- Agreed power and control connections
- Earthing and integration with the existing system
- Controller configuration and operating-sequence checks
- Testing, commissioning and handover
Request an AMF panel installation quotation with your site layout, generator datasheet and electrical single-line diagram.
AMF Panel Installation for an Existing Generator
Unique Power Solutions can review an existing generator installation for AMF control integration.
Share the generator make, model, controller details and available remote-start interface. Also provide information about the existing mains incomer, transfer equipment and connected load.
If your site already has an automatic transfer switch (ATS), include its drawings and model information. The review helps establish which control and switching components can be retained and which changes are needed.
For a generator AMF panel replacement or upgrade enquiry, add photos of the existing panel and describe the required improvement.
AMF Panels for Diesel and Gas Generators
Unique Power Solutions supports control-system enquiries for both diesel generators and gas generators.
AMF controller selection depends on the generator interface and operating requirements. Engine signals, control power and communication requirements should be checked for the proposed equipment.
For a diesel generator AMF panel or gas generator AMF panel quotation, provide the engine and generator controller information. Compatibility is confirmed for the selected arrangement.
What Details Are Needed to Select an AMF Panel?
An AMF panel for a generator must be selected using the electrical system and control requirements.
| Selection Detail | Information to Share |
|---|---|
| Generator Rating | Rated kVA and kW, make and model |
| Electrical Supply | Voltage, phase and frequency |
| Load Requirement | Running demand, starting loads and backup priorities |
| Switching Equipment | Existing or required transfer device, current rating and protection details |
| Generator Interface | Controller model, start/stop connections and available signals |
| Installation Environment | Indoor or outdoor location, enclosure requirements and available space |
| Integration | Existing ATS, distribution panel or monitoring-system details |
| Project Scope | New installation, panel replacement, control upgrade or turnkey work |
Use the generator datasheet and electrical drawings to support the enquiry. Ask the quotation to state the controller model and power-switching equipment separately.
Get a Generator AMF Panel Quotation
Unique Power Solutions can review your generator and site details to prepare an AMF panel supply or installation proposal.
Send the generator rating, controller information, site location and required operating functions. Request equipment specifications, an itemized price and the proposed delivery and installation schedule.
AMF Panel Price and Installation Cost
AMF panel price depends on the controller, switching equipment, electrical rating, enclosure and required functions.
When comparing an AMF panel quotation, confirm the scope being offered:
- AMF controller or control module
- Complete panel with the required switching equipment
- Panel supply with installation and commissioning
- Integration with an existing ATS or generator system
AMF panel installation cost also depends on cable routes, site access, modifications to existing equipment and the commissioning scope.
Ask the proposal to identify controller and panel costs, transport, installation work, testing, warranty terms and applicable charges. Compare quotations using the same equipment rating and scope.
Testing and Handover After AMF Panel Installation
Unique Power Solutions includes testing and commissioning within agreed turnkey project services.
For an AMF installation, agree on the commissioning checks and site arrangements before testing begins. The checks should address mains monitoring, generator start commands, generator readiness, transfer operation and return-to-mains behaviour.
Also review the specified operating modes, interlocks, feedback signals and configured alarms.
Request the agreed handover documents, such as:
- Panel and electrical drawings
- Controller model and operating information
- Recorded settings and sequence description
- Commissioning results
- Warranty and support terms
The final test procedure depends on the installed controller, transfer arrangement and connected loads.
AMF Panel Applications for Businesses
Unique Power Solutions evaluates AMF requirements for industrial, commercial and institutional generator systems.
| Application | Requirement to Discuss |
|---|---|
| Manufacturing Facilities | Backup priorities and machinery starting sequence |
| Chemical and Pharmaceutical Plants | Process loads, pumps, compressors and required controls |
| Commercial Buildings and Hotels | Selected building loads and automatic changeover requirements |
| Hospitals and Laboratories | Load priorities and required power continuity |
| Warehouses and Logistics Facilities | Lighting, handling equipment and refrigeration, where applicable |
| Infrastructure Projects | Generator duty and integration with the site electrical system |
For loads that must remain powered while a stopped generator starts and the load transfers, discuss suitable UPS support or another provision to bridge that interval.
AMF Panel Support Within Turnkey Power Projects
Unique Power Solutions can coordinate AMF panel supply with generator installation, electrical integration and commissioning through its turnkey power project services.
For an existing system, enquiries can also include controllers, relays, sensors and other generator control components and spare parts.
Describe the complete requirement when requesting a quote so the equipment and installation work can be assessed together.
AMF Panel Supply and Installation Enquiries in Gujarat
Unique Power Solutions supports India enquiries through its Ankleshwar office.
For projects in Ankleshwar, Bharuch, Surat, Vadodara or other locations, share the exact site address and required project schedule. The proposal can identify the applicable supply, transport, installation and commissioning scope.
For a replacement requirement, include the existing panel details and the available installation window.
Buyer FAQs About Generator AMF Panels
Selection requires the generator rating, voltage, phase, controller model and start/stop interface. The load and transfer-equipment requirements also matter. Share the generator datasheet and electrical diagram with Unique Power Solutions to evaluate a compatible panel arrangement.
The price depends on the controller, electrical rating, power-switching equipment, enclosure and required functions. Installation and modifications add to the project cost. Request an itemized quotation identifying the complete equipment and service scope.
Installation can be included in an agreed scope. Ask the quotation to identify panel mounting, power and control connections, earthing, configuration, testing and commissioning. Confirm customer responsibilities and any separately priced work before ordering.
An existing DG set can be evaluated for AMF integration if its start/stop interface and electrical arrangement support the proposed system. Share the generator and controller details, existing transfer-switch information and panel drawings for compatibility assessment.
Yes. Suitable AMF controllers support diesel and gas generator applications. The selected controller, engine interface and operating sequence must match the generator. Confirm compatibility for the specific model and required functions in the proposal.
The schedule depends on equipment availability, cable work, existing-system modifications, site access and commissioning requirements. Provide the site details and preferred installation window. Request a confirmed plan showing the required shutdown arrangements and handover schedule.
Request the agreed drawings, controller information, recorded settings, commissioning results and operating guidance. Confirm warranty terms and support arrangements. These documents help the site team understand the installed system and manage future maintenance.
Starting a stopped generator and transferring the load takes time. An AMF system automates that sequence. For equipment requiring power throughout the start-and-transfer interval, discuss a compatible UPS or another suitable provision as part of the system design.
Request an AMF Panel and Installation Quote
Unique Power Solutions can evaluate AMF panel supply, installation or control-system integration for your generator.
Send:
- Generator make, model and kVA/kW rating
- Voltage, phase and frequency
- Generator controller and existing transfer-switch details
- Load requirements and desired operating functions
- Site location and electrical drawings
- Required supply and installation date
For replacement enquiries, add panel photos and details of the existing equipment.